Zirconia Crowns in Turkey

Brief info about zirconia crown procedure

Question	Answer
Time for final results 📅	The complete fit and adjustment typically take about 2 weeks.
Procedure time ⏳	Each visit lasts approximately 2-3 hours.
Trust in Turkish dentists 🇹🇷	Yes, Turkish dentists are renowned for their high standards in dental care.
Driving after treatment 🚗	You can drive after the anesthesia's effects have subsided.
Flying after treatment ✈️	It's generally safe to fly 24-48 hours post-procedure.
Return to work 💼	Most patients can return to work the following day.
Success rate 📈	The success rate ranges from 90 to 97% over five years.
Pain level 🌡️	Any discomfort is minimal after the procedure and managed with a painkiller.
Is it worth it? 😁	Yes, absolutely given its combination of durability and aesthetics.
Sleeping post-treatment 🛌	There are no specific restrictions on sleeping post-treatment.
Anesthesia type 💉	Local anesthesia is typically used during the procedure.
Shower after treatment 🚿	Showering 1 day later is permitted without any restrictions.
Safety in Turkey 🏥	Yes, safe accredited dental clinics and experienced and well-educated dentists in Turkey adhere to high safety standards.
Cost comparison Turkey and UK 💰	Treatment in Turkey is generally more affordable than in the UK and no waiting for the procedure!
Suitable age 👩‍🦳👨‍🦱	Suitable for adults particularly those 18 and older.

What are zirconia crowns in Turkey?

The zirconia crown procedure is a dental treatment that is employed where there is damage or aesthetic problems on the teeth. It is commonly done on teeth that have caries, cracks, or teeth that have been worn down very badly. Also, it can be chosen to improve the appearance of the teeth, particularly in cases where the teeth or gums of the patient are visible. It entails the dentist making the tooth ready, making an impression, and following it up by having a zirconia crown crafted in a lab to fit the patient. Zirconia crowns are also long-lasting and have a very esthetic appearance; their success rate stands at between 90-95%. It is not painful due to the involvement of local injections. This treatment is performed by a specialist dentist or a prosthodontist. Read more

Zirconia crowns benefits in Turkey

• Durability: Zirconia crowns are very strong and appropriate for damaged teeth.
• Stain Resistance: These are good for stained or discolored teeth and they give a natural appearance. Read more
• Alignment Improvement: They assist in the enhancement of teeth placement as well as position.
• Strength for Fragile Teeth: Especially suitable for people with brittle teeth as it does not chip and split.
• Long-Lasting: They are a more or less dependable way of achieving what previous crowns proved to be an unreliable method of getting.
• Cosmetic Enhancement: They improve on the aesthetics of smiles which in turn brings about additional confidence. Especially this procedure is ideal for Hollywood Smile.
• Decay Restoration: Used where there is a big pocket or a lot of decay.
• Suitable for Grinding: Ideal for patients with night grinding or clenching of teeth.
• Biocompatible: Zirconia is bio-compatible and thus has fewer chances of an allergic reaction.
• Natural Appearance: They look like natural teeth thus improving on the looks.
• No Metal Allergy: Other advantages of zirconia crowns include; the fact that they are metal-free hence no chance of having an allergic reaction to metals.
• Minimal Tooth Reduction: These have less tooth reduction as compared to other crowns used in the dental field.
• Resistance to Wear: Extremely durable thus can easily last longer than the normal wear and tear period.
• Quick Results: It is a fairly short course of treatment that results in an instant change for the better in the patient’s appearance.

Who is a good candidate for the zirconia crown procedure?

I advise zirconia crowns to my patients when they have different dental complications. Zirconia crowns are ideal if you have structurally weakened teeth and the decay rate or damage is high. They are also recommended for extensive stains or color changes that cannot be addressed with whitening procedures. Zirconia crowns are useful when teeth are crooked or weak for additional support so that the teeth do not sustain more harm. As for the people who clench or grind their teeth these crowns are ideal since they are strong. In particular, the teeth that are clenched or ground are suitable for these crowns because of their long-wearing nature.

Except for severe illnesses, people with lesser health issues like heart problems, diabetes, or high blood pressure can also get zirconia crowns if their doctors permit such a procedure. However, lifestyle conditions such as smoking or improper oral hygiene impact the treatment outcomes. I pay attention to the age factor though the treatment is most often offered to adult patients and check for any signs of ongoing infections or untreated dental problems. To ensure that zirconia crowns do not fail after a short while, patients should ensure that they attend their dentist regularly as well as ensure that they brush their teeth as required.

What should I do before zirconia crowns?

A few preparatory measures are taken to plan for zirconia crowns to achieve the best results. First of all, one should discuss the problem with one’s dentist in detail. It is essential to provide information about the procedure, ask all the questions that you have, and state your expectations. Such a conversation will assist your dentist in customizing the treatment and make sure that you understand all aspects.

Make all the necessary preparatory measures known to your dentist; for instance, if you are on blood thinning medication your dentist may have to change your dosage at least for the time around your appointment since you may bleed profusely. Your dentist will also examine your mouth and your teeth, he or she might take some measurements or impressions for the placement of the crown.

Smoking and alcohol should be quit before and after the crown procedure because those behaviors hurt the healing process. Also, do not eat a heavy meal before the procedure as it may cause some complications.

Step-by-step zirconia crown procedure

As a dentist who has done this treatment many times with successful results, I want to inform you about how the zirconia procedure is done:

• An examination of the patient’s condition is done and their suitability for the crowning procedure is evaluated.
• Mentions of the X-rays and scans of the involved teeth and the bone tissue that exists around them are made for better planning.
• The tooth has to be prepared by first restricting any decay on the crown and second creating an appropriate shape to receive the crown.
• The patient is then given local anesthesia to avoid feeling any pain when the operation is being conducted.
• A plastic sheet or impression of the prepared tooth is made so that the ideal mold of the incipient cavity can be obtained.
• A temporary crown is then put on the prepared tooth as one waits for the permanent zirconia crown to be manufactured.
• This mold or digital scan is taken to a dental laboratory to create the zirconia crown.
• After the fabrication of the permanent crown, the temporary crown is refitted.
• The new zirconia crown as produced in this process is then fitted and shaped to match the other teeth and is checked for color.
• Should there be any rough edges or it is ill-fitting, I make slight alterations to its crown.
• This crown and tooth are cleaned and dried before cementing is done.
• Dental cement is used and then the zirconia crown is delicately put on the prepared tooth.
• There are standard procedures that are followed in every patient involving the treatment of the patient, oral hygiene, and the follow-up appointment.

Zirconium teeth design with computer

Computer-aided zirconium dental prostheses are a breakthrough in dentistry as they are accurate, individually made, and time-saving products.

The most accurate impression can be made by using the digital impression scan of the teeth. The design of the prosthetics is produced by using CAD/CAM technology so that it can be a perfect model. Cosmetics is another aspect that is taken into consideration when fitting prostheses since they have to look nice. To provide the results on time, an efficient process of production is followed. Virtual bite analysis is made to ensure that there will be a proper fit of the dental devices. In the process, adjustments can be made in real-time depending on the progress or lack of it. Great accuracy is ensured through precise work, for example, the process of milling. Quality control is a stringent process that is undertaken to ensure the set quality is achieved. The prosthetics are replaced in a way that they harmonically blend with the natural teeth of the patient which makes them look very natural.

In general, the treatment with zirconia crowns in European countries means long waiting times and high prices. On the other hand, the overall cost of the zirconia crown treatment in Turkey is more affordable as compared to many of the other countries. Regarding mobility, if you decide to receive treatment here, many clinics provide VIP transport from the airport and to the hotel. Also, the service provides an opportunity to consult with the dentist at any time, including at night.

Note: You can contact Kuram Dental in Antalya to get detailed information about the zirconia crown procedure and to be examined. You can also read about porcelain veneers (İnternal link verelim bu yazıya).

Does zirconia crown treatment hurt?

No, the zirconia crown treatment procedure does not cause any pain.

Local anesthesia is employed to make the area to be operated on insensitive to pain which means that you will not feel any pain during the exercise. There may be some soreness after this process and you may not want to take hot or cold foods or beverages immediately after the treatment. This is quite common and can be controlled using over-the-counter medications such as ibuprofen or paracetamol. However, if the pain is severe or if the pain goes on for over three days then it will be wise to consult your dentist. Any swelling (If happens) can also be reduced by a cold compress or ice pack.

Are zirconia crowns treatment worth it?

Yes, I can say that zirconia crown treatments are worth it for the following reasons. Certainly, zirconia crowns for teeth have great resistance; they improve greatly the strength of compromised teeth. It presents superior anti-chipping and anti-cracking features therefore best suited for long-term usage. These crowns also somewhat resemble normal teeth and are therefore ideal since they provide the patient with a better smile and self-confidence.

From the functional perspective, the patients wearing zirconia crowns can chew with comfort and no sensitivity to pain. The psychological effects are also numerous since the patients experience enhanced self-esteem and satisfaction with their dental health. The positive experiences of patients and convincing zirconia crown before and after photos of the results are additional proof of the worth of this treatment.

Are zirconia crown procedures safe in Turkey?

Yes, the zirconia crown procedure in Turkey is safe.

• Experienced Dentists: Turkish dentists are well-educated and experienced in dental treatments. Many of them know English well.
• Positive Reviews: Most patients have positive zirconia crowns reviews and express their satisfaction with the procedure in their comments.
• Robust Healthcare Infrastructure: Today, Turkey has one of the strongest healthcare systems with relatively new and sophisticated equipment.
• Fully Equipped Clinics: Dental clinics are well-equipped with modern-day technology and equipment.
• Certified Hospitals and Clinics: These facilities are accredited and comply with international standards.
• Strict Inspections: It is well known that the Ministry of Health conducts thorough checks on hospitals and clinics to prevent any danger.
• Comprehensive Services: Several clinics have other services provided such as transportation and availability of support at any time of the day.

How long do zirconia crowns last?

Zirconia crown's lifespan is about 20 years or more provided they are properly maintained.

The durability of the denture crowns created from zirconia will vary with the skill of the dentist, the general health of the patient, the machinations of the fit of the zirconium crown, and the source of the zirconium used. Daily brushing and flossing also remarkably increase the crowns’ duration since their surfaces will be free from plaque and debris that cause weakness. It is also essential to stop thrashing activities such as teeth grinding and biting hard things to increase the product’s life expectancy. In addition to that, dental check-ups and professional cleaning of teeth also help in increasing the longevity of zirconia crowns.

Zirconia crown vs porcelain

Zirconia crowns and porcelain crowns are both resolutions that are commonly used in dentistry with certain advantages. Zirconia crowns are very strong and can withstand a lot of pressure thus it is preferred for the posterior teeth and patients with bruxism. They also have very good biocompatibility and do not chip or crack. Porcelain crowns are preferred because of their fine esthetic properties owing to their opaque nature that gives them the best match to the natural teeth. Nevertheless, porcelain crowns are more susceptible to chipping compared to zirconia. The decision to use a zirconia or porcelain crown depends on the situation; for instance, the area of the mouth, the structure, and the forces involved in chewing food.

When can I fly after zirconia veneers?

It is recommended that you do not fly for at least a day or two after receiving a zirconia crown.

The waiting period will assist one to allow some time for any early discomfort, swelling, bleeding, or sensitivity to reduce. These problems are always possible when one flies high because the high altitude puts pressure on the body and slows down the healing process since the pain gets worse. Taking a 1 or 2-day break to begin the healing process makes the flight more comfortable and eliminates to an extent any chances of the zirconia crowns disadvantages.

What should I eat after zirconia crown treatment?

After the zirconia crown treatment it is recommended that you take meals that are soft and should not cause you to chew often. No hot or cold meals should be taken after surgery as this may lead to either a burn or a bite as one cannot feel such sensations during the time the anesthesia is still active. Avoid piping hot soups, rice, warm sweets, and other foods that are of low temperature. Avoid taking foods that may stick to the crown or any hard foods that may cause much irritation on the crown. It is advisable to brush gently on the affected region to avoid irritation of the affected area.

What is the success rate of zirconia crown treatment?

The success rate of the zirconia crown treatment is about 90%-95% of patients who undergo treatment.

In our clinic, for example, our success rate is 96%. This we think was due to the expertise of the team of dentists that we have as well as the quality of the material that we use. Adherence to detail while performing procedures and developing a trusting relationship with the patients add to the achievement in this domain as well. Also, giving aftercare tips and follow-up appointments to our patients contributes to this high rate as well. Adhering to the new technology and implementing all of these contribute to the success of the clinic.

Types of zirconia crowns

There are several zirconia crown types. Full-contour zirconia crowns are solid and recommended for the posterior teeth because of the material’s strength and resilience. Laminated zirconia crowns are more esthetic as they have an esthetic veneer layer put on top of the strong zirconia core and so they are suitable for anterior teeth. Such crowns include the monolithic zirconia crowns that are prepared from a single piece of zirconia offering high strength and esthetics. MGC crowns especially high-translucency zirconia crowns replicate the natural enamel translucency making the visible teeth more aesthetic. Also, anterior zirconia crowns are the crowns that are meant for the anterior teeth where the primary concern is beauty. It is because each type is appropriate to the particular needs depending on the position and the role of the tooth that has to be restored.

What type of anesthesia is used for the zirconia crown procedure?

During a zirconia crown treatment, the use of local anesthesia is considered to be the most effective. This kind of anesthesia only blocks sensation in the area that is being operated on so that the patient is not sensitive to pain. Local anesthesia usually occurs within a few minutes and its action mostly lasts for one to three hours. If the patient begins to feel numbness starting to recede during the surgery, then additional anesthetic can be administered to keep the patient comfortable.

Don't eat right after the procedure. This is because one is likely to bite the tongue or the cheek or hurt the mouth in some way when the numbness has hardly worn off. The consequences of the anesthesia last for several hours after the surgery.

Note: You can contact Kuram Dental in Antalya to get detailed information about the zirconia crown procedure and to be examined. You can also read about porcelain veneers

This article is for informational and advisory purposes. The recommendations of your surgeon should be a priority.

We wish you healthy days.